Herzlich Willkommen zu unserem neuen Professionalaudio Online-Shop!

Inward Connection Bad Boy VCA Compressor

Mehr Ansichten

Inward Connection Bad Boy VCA Compressor
1.049,58 €
Zzgl. 19% USt., zzgl. Versandkosten

Verfügbarkeit: Lieferbar

Specifications:

Input Impedance: > 20K ohms balanced

Output Impedance: 600 ohms balanced

Frequency Response: +/- 0.2dB @ 10Hz to 100KHz

Output Signal to Noise: < -95dB

THD + Noise: 0.01% @ 1KHz/+4dBu

Distortion: 0.01% THD, +4dBu @ 1KHz
Beschreibung

Details

Inward Connections knows a thing or two about putting big sound in small packages. The Bad Boy compressor is no exception. The Bad Boy 500 Series VCA Compressor picks up where its predecessors, the VC500 and VOGAD, left off. It provides a huge range of compression timing options, allowing users to dial in attack and release to suit almost any source imaginable. This versatile circuit is also coupled to the famed VF600 discrete amp blocks and an all-new Wet/Dry Mix circuit, allowing tonal settings never before available on an Inward Connections VCA compressor. With its range of ratios, array of timing options and integrated Mix control, the Bad Boy is ready to tackle any source. It’s ready to work whether it’s leveling gentle acoustic guitars, smashing drums, tightening the mix bus, or even mastering. The Bad Boy is a good thing for any 500 Series rack. Features: VF600 discrete amp blocks Transformerless differential-balanced input Transformer-balanced output Wet/Dry Mix control LED Output VU meter -18db to +6dB Gain Makeup control +/- 16dB Threshold Control -40dB to +22dB Ratio Control 2:1 to 30:1 to infinity Attack Control 0.2 milliseconds to 20 milliseconds Release Control 0.1 seconds to 3 seconds LED Gain reduction meter -2dB to -20dB High Pass Filter – 250Hz sidechain filter Stereo Link – can be tied to an adjacent unit Bypass – relay engaged bypass
Zusatzinformation

Zusatzinformation

UPC / EAN Nein
Herstellungsland Vereinigte Staaten
Lieferzeit Nein
Farbe grün
Hersteller Inward Connections
Zustand Neu

Artikelschlagworte

Benutzen Sie Leerzeichen um Schlagworte zu trennen. Benutzen Sie (') für Phrasen.